Categories
Brands
CompareD10CC60UNVA‐VN - 1050mA LED Driver - Output Power 60W - 0‐10Vdc Analog Dimming Control - Class 2 - 12V Power source for Active cooling device - No Mounting Feet
 Click to enlarge |
|
Output Voltage 19V - 57V, Output Current 32mA - 1050mA, Max Output Power 60Watt, Analog 0 to 10 vDC Voltage Control, Class 2 Output, Universal input voltage 120 – 277 Vac, 12V Power Source for Active Cooling Device, Constant Current LED Driver, Square Case without Mounting Feet
Universal Lighting Technologies / LED Drivers
Constant Current Low-Wattage (>=50W)
– EVERLINE® high wattage drivers for outdoor and high lumen applications feature thermal protection circuits with a variety of control options.
– EVERLINE® drivers for mid-wattage applications are ideal for high lumen downlights, high bay fixtures, and outdoor luminaire applications.
wattage drivers are designed with form factor and control options to meet your linear, track, and downlight needs.
– Drivers with tuning provide the ability to set the output current at levels lower than its full output rating, while maintaining the same voltage range. This new tuned level becomes the full light output for dimming control.
| Stock Code | UNVLT_D10CC60UNVA‐VN |
|---|---|
| Brand | Universal Lighting |
| Family | LED Driver - Constant Current Low Wattage (>=50W) |
| Part No | D10CC60UNVA‐VF |
| Dimmable | Yes |
| Length (in) | 5.51 in (140.0 mm) |
| Width (in) | 5.02 in (127.5 mm) |
| Height (in) | 3.62 in (92.0 mm) |
| Voltage (V) | 120 ~ 277 Vac |
| Input Current | 0.59 /120V 0.26/277V |
| Bulb Type | LED |
| Mounting | No Mounting Feet |
| Output Voltage | 19V - 57V |
| Output Current | 32mA ‐ 1050mA |
| Output Power | 60W Max |
| Power Factor | >0.95 |
| Start Temp. (Min) | ‐40°C (-40°F) |
| Start Temp. (Max) | 50°C (122°F) |
| THD: | <20% |
| Weight (lb.) | 1.25 |
| Lead Lengths | 8 in. |
| UL Listed | cCSAus |
| Warranty | 5 Years |
| Notes | Analog 0 to 10 vDC Voltage Control |
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
