Dyson Airblade Tap (Wall) - Hand Dryer AB11 120V 60Hz - Stainless Steel - Brushed
Click to enlarge |
|
No waste water on the floor. With Airblade hand drying technology in a tap, hands can be dried at the sink in just 14 seconds. There is no need for users to move to a separate drying area. so no water is dripped on the floor.
Dyson Airblade Tap
AB09
AB10
AB11
Electrical
- Input voltage/Frequency: 120-127V 50 & 60 Hz
- Rated power: 1400 W
- Motor type: Dyson digital motor V4 – brushless DC Motor
- Motor switching rate: 6,100 per second
- Motor speed: 92,000 rpm
- Operating temperature range: 0°– 40°C
- Heater type: None
- Standby power consumption: 0.5 W or below
Construction
- Tap construction: Stainless steel (brushed)
- Under counter motor assembly construction: Moulded ABS (main unit),also uses PC & PP
- Exterior screw type: Anti-tamper M6 machine screw
- Water ingress protection to IP35
Filter
- HEPA filter (glass fibre and fleece prelayer)
- Bacteria removal from air: 99.97%
Operation
- Touch-free infra-red activation
- Hand dry time measurement: 14 seconds.
- (Measurement based on National Sanitation Foundation Protocol P.335)
- Operation lock-out period: 30 seconds
- Airspeed at apertures: 675 km/h
- Operating airflow: Up to 35 L/s
Water Operation
- Water flow rate: 4L/min & 1.9L/min
- Tap Aerator: Aerated water outlet
- Tap power supply: Mains supply
- Water temperature control: Thermostatic mixer recommended (not supplied)
- Water pressure required: 1-8 Bar
Logistics
- Serial number prefix: AB09 ED9; AB10 EE1; AB11 EE2
- Single unit order code: AB09 25995-01; AB10 25996-01; AB11 25997-01
- Net weight: AB09 9.48lbs (4.3kg); AB10 10.14lbs (4.6kg); AB11 19.7lbs (8.95kg)
- Packaged weight: AB09 13.45lbs (6.1kg); AB10 14.33lbs (6.5kg); AB11 25.1lbs (11.39kg)
-
Packaged dimensions (in / mm):
AB09 H12” (303mm) × W11¼” (284mm) × D11¼” (286mm)
AB10 H10¾” (276mm) × W17¼” (437mm) × D11” (280mm)
AB11 H12” (302mm) × W24” (610mm) × D14¾” (375mm) - Unit barcode: AB09: 8799 5700 914 1; AB10: 8799 5700 915 8; AB11: 8799 5700 916 5
Sink Specifications:
- The Dyson Airblade™ Tap is compatible with most sink types. Ensure plugs are not installed in the sinks.
- Recommended sink dimensions: All sink measurements are internal unless stated otherwise.
- Width of sink - Minimum: 13¾” / 350mm
- Front to back - Minimum: 11¾” / 300mm
- Depth of sink – Minimum: 4” / 100mm
- Depth of sink - Maximum for AB10 only: 7¾” / 200mm (External measurement)
- Sink materials: Sinks with highly polished surfaces should be avoided e.g.shiny chrome. Porcelain and brushed metal are ok to use.
Standard warranty
- 5 year parts, 1 year labour warranty
Product Certification
- ETL - Complies with: CAN/CSA-E60335-2-23
- ADA Compliant
-
Stock Code Dyson_AB11 Brand Dyson Family Dyson Airblade Tap Part No 25997-01 UPC 8799 5700 916 5 Voltage (V) 120-127V 60 Hz Amperage 11.60Amp Rating Rated Power: 1400 W ADA Compliant ADA Complaint Width (in) 12" / 302mm Height (in) 24" / 610mm Depth (in.) 14.75" / 375mm Automatic Operation Automatic Operation Color Stainless Steel Motor: Motor type: Dyson digital motor V4 – brushless DC Motor Material Stainless Steel (Brushed) UL Listed ETL - Complies with: CAN/CSA-E60335-2-23, NSF Case Quantity 1 Warranty 5 year parts, 1 year labour warranty
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: