AutoGuard 2.4GHz Wireless Receiver / Recorder - Liteline GMSR1

The GMSR1 is a 4-channel wireless receiver/recorder to be used with AutoGuard^® Motion Tracker with Camera (i.e. GMSCR150 and GMSCR300). This wireless receiver / recorder is able to monitor up to 4 different motion tracker units and record video/photo feed onto an SD memory card. The GMSR1 can be sued to view the transmission from the motion tracker units onto a TV. The 2.4GHz AutoGuard^® wireless receiver/recorder is complete with a video cable, 1GB SD Card and a power supply adapter.

Description
GMSR1 is a 4-channel wireless receiver with recording capabilities, to be used with AutoGuard® Motion Tracker with Camera (i.e. GMSCR150 and GMSCR300). This wireless receiver/recorder is able to monitor up to 4 different motion tracker units and record video/photo feed onto an SD memory card. The GMSR1 can be used to view feedback on TV. The 2.4GHz AutoGuard® wireless receiver/recorder is complete with a video cable, 1GB SD Card and a power supply adapter.

Features
• Power supply: 5VDC / 1000mA
• Receiving frequency range: ISM 2,400MHz ~ 2,468MHz
* CH1 = 2,414MHz
* CH2 = 2,432MHz
* CH3 = 2,450MHz
* CH4 = 2,468MHz
• Frequency stabilization: ±100ppm
• Demodulation type: FM
• RF Port Impedance (Antenna): 50 ohm SMA
• Receiving sensitivity: ≤-85 dBm
• Output signal impedance: 75 ohm
• Output signal level: 1.0V +/- 0.1Vpp
• Input signal level: 1.0V +/- 0.1Vpp @ 75 ohm
• Consumption current (max.): 600mA
• Unobstructed effective range: 100m (330 ft.) approx.
• Memory type: Mini SD card
• Maximum memory size: 2 GB
• Video format: AVI, 320x240
• Photo format: JPEG, 640x480
• Frame rate: 25 fps
• Video clip time lapse: 5~30 seconds (adjustable)
• Operating temperature: -10°C ~ +50°C / +14°F ~ +122°F