Categories
 
Brands
 
Compare

No items to compare

ALLTEMP Desuperheating Heat Exchangers - 49-5838

ALLTEMP Desuperheating Heat Exchangers - 49-5838
Click to enlarge
Price Per Item: $897.00
Availability: Pre-Order
Model: ALLTEMP_49-5838
Manufacturer: ALLTEMP
Average Rating: Not Rated

71⁄2  Refrigeration tons - 5/8'' Water Line Opening - 1 1/8'' Refrig. Gas Line Opening - 18000 Max BTU/Hr. Water Heated - 21.5 Max Gal.to be Heated 50°F to 50°F/ Hr. - 5.0'' Shell Dia. - 18.0'' Length - 20.0 Weight(lbs)

Superheated Refrigerant Gas To Water

• Commercial refrigeration compressors can be used to provide an abundance of water at 150° (or even 180°) while at the same time doing its intended refrigeration job and at a saving of perhaps 8 to 10% of the electrical power it would normally require. This is accomplished by installing a heat exchanger designed for interchange of heat between super-heated refrigerant gas and water. Such a system provides significant energy savings at a comparatively low investment cost.

• This type of exchanger is installed in the discharge line between the commercial refrigeration compressor and the condenser, whether it be water or air cooled style.

• In an ordinary commercial refrigeration system almost 30% of the condensers work is spent reducing the superheated gas temperature to the condensing temperature. The balance of the condensers job is condensing the gas to liquid and sub-cooling it.

• Therefore, if the above mentioned heat exchanger is designed to pick up only the heat of the superheat it is assured that only high temperature water will be provided. At the same time if the existing water or air cooled condenser does not have to handle the heat of superheat, it has additional capacity and the condensing temperature and pressure will drop causing the compressor to require less power.

• Over sizing the heat exchanger would cause it to act somewhat as a water cooled condenser and the temperature of the water to be heated would be much lower.

• With the addition of this type of heat exchanger it is also advisable to add an insulated hot water storage tank of ample capacity.

• Usually these heat exchangers should be installed on commercial systems using automatic or thermostatic expansion valves. Installation must always be made by a qualified refrigeration service engineer. If installation is made on a capillary fed system it should be under the direction of a refrigeration engineer having knowledge of capillaries.

Applications

  • Commercial refrigeration
  • Heat pumps
  • Milk coolers
  • Air conditioning, etc.
  • Stock Code ALLTEMP_49-5838
    Brand ALLTEMP
    Family Superheated Refrigerant Gas To Water
    Part No 49-5838
    Length (in) 18.0"
    Diameter (in) 5.0''
     
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.