ALLTEMP Driers - 47-T-304S - Sweat Fittings
Click to enlarge
1/2'' Flare Fittings - 3 to 71⁄2 Nominal Tons - 2 1⁄2" Shell O.D. - 9 7/8'' Overall Length - 2.3 Weight(lbs.)
A large cylindrical inlet screen held by a strong spring keeps the desiccant securely in place. The inlet screens design allows some dirt particles through to become trapped in the maze of tightly held desiccant. This enables the drier to collect considerably more dirt than one which collects dirt only on a surface. All of the volume of desiccant in this drier is used efficiently to dry and clean the system since no binder is used as in the case of a molded block drier. These driers are exceptionally high in acid removal capacity.
• The advantages of a mixed desiccant drier without the usual disadvantages of either a molded block drier or a loose desiccant drier.
• In-depth filtration.
• XH-9 desiccant - recommended by desiccantmanufacturers for all refrigerants and lubricants.
• Provide interchange ability with other driers for convenience.
|Family||Filter - Driers|
|Length (in)||9 7/8"|
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: