ALLTEMP Stainless Steel Lines - 03-SD4-30-30
Click to enlarge |
|
1/4" x 30"
Construction Features:
The SD4 series is made from the best high molecular weight, low crystallinity, modified PTFE resin. This means that the SD4 series has approximately 60 Times the resistance to flex fatigue than other hoses. The SD4 is also able to withstand far greater impulse pressure loading, vibration at any frequency or amplitude, hot-cold cycling and continuous high temperatures. Plus it has a greater dielectric strength and lower permeability.
Service Recommendations:
The SD4 series performs without surprises or disappointments even in the most severe conditions in the medium pressure range. Accelerated aging tests and extensive field experience show that SD4 series hoses may be safely regarded as virtually permanent flexible connections when properly applied. If you’re looking for maximum freedom from needless hose failure, look no further.
SD4 Hose Construction
Tube: Heavy wall, high molecular weight, low crystallinity, modified PTFE with exceptional concentricity.
Reinforcement: Double braided stainless steel wire.
Type SD Stainless Steel Lines
• Extruded core "smooth bore".
• Medium pressure.
• Heavy duty.
• The only line used and approved by major commercial refrigeration manufacturers.
• Eliminates refrigerant loss from broken capillary.
Hose Specifications
• Pressure ratings in PSI at 70°F (20°C).
• Maximum continuous operating temperature for long life, 500°F (260°C).
• Additional details on request.
Connection |
Nominal ID |
Pressure |
|
Burst |
Operating |
||
1/4" flare female |
3/16" |
12,000 |
4,000 |
3/8" flare female |
5/16" |
10,000 |
3,300 |
Stock Code | ALLTEMP_03-SD4-30-30 |
---|---|
Brand | ALLTEMP |
Family | Stainless Steel Lines |
Part No | 03-SD4-30-30 |
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: