ALLTEMP Capillary Tubing Service Tools - 51-1003
Click to enlarge |
|
Capillary Tubing Service Tools
Cap-Check
The Cap-Check is a Thermal Engineering innovation that has made cap tube cleaning possible and practical. It is designed to pump a high rate of oil into the cap tube, building up pressures needed to open any plugged cap tube. The Cap-Check will also clean partially plugged cap tubes when used with the 55-1101 Thermal Chaser Kit.
51-1003 |
• Cap-Check is a portable, self contained hydraulic power unit with auxiliary equipment especially adapted to cleaning refrigeration capillary tubes. • A 0 to 6000 PSI gauge shows pressure build-up if cap tube is restricted and also shows when chaser has passed through the tube. A trigger operated gauge shut-off is provided so the gauge will not be damaged if pressures greater than 6000 PSI are desired. A 30" high pressure hydraulic hose with a 1/4" SAE male flare outlet connects the cap tube to the Cap-Check for simple handling. • An adapter is supplied to connect the cap tube directly to the hose outlet without a flared fitting |
Stock Code | ALLTEMP_51-1003 |
---|---|
Brand | ALLTEMP |
Family | Cap-Check |
Part No | 51-1003 |
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: