Leviton IPHS5-1LI Humidity Sensor and Fan Control, Single Pole, Ivory
Click to enlarge |
|
Humidity Sensor and Fan Control, Single Pole, 600W Incandescent, 150W LED/CFL, 400VA Inductive/Ballast, 1/6th HP Motor, Wallplate not included, Ivory
The Leviton Humidity Sensor and Fan Control automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew. The sensor uses a microprocessor combined with state-of-the-art digital sensing technology to continuously monitor and manage humidity levels in areas of the home prone to condensation and mildew. It features user-friendly controls to adjust sensitivity, humidity level and time out settings. The sensor can replace a single pole switch and can be used with most bathroom or ventilation fans or fan/light combinations. It is designed to fit within a standard wallbox and requires a neutral wire for operation. Contemporary in design, the Humidity Sensor and Fan Control is the ideal solution for controlling ventilation in areas of high humidity, dampness or rooms prone to condensation and mildew such as: Bathrooms, Basements, Laundry Rooms and Home Spas. The sensor also helps reduce energy usage by automatically operating the fan only when needed to control excess humidity.
Features and Benefits
- Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew
- Sensor uses microprocessor and digital sensing technology to continuously monitor and manage humidity levels in a room
- Built-in timer sets the “minimum ON time” for the ventilation fan. The sensor time settings can be custom set to 10, 20, 30 or 45 minute intervals. The sensor will continue to operate the fan for the minimum time set or until there is a reduction in room humidity level
- A sensitivity level adjustment allows users to adjust the sensor’s sensitivity to ambient air to prevent false cycling
- Features an Air Cycle mode which automatically turns ON the ventilation fan for a set period of time and repeats the cycle hourly (eg. 20 minutes ON/40 minutes OFF each hour)
- Replaces a single pole switch for control of ventilation fan or a fan/light combination
- Fits in a standard wall box and requires a neutral for operation
- The device’s built-in humidistat control meets CALGREEN requirements for Indoor Air Quality and Exhaust.
- Five-Year Limited warranty
-
Stock Code
Leviton_IPHS5-1LI
Brand
Leviton
Part No
IPHS5-1LI
UPC
07847765483
Rating
600W Incandescent, 150W LED/CFL, 400VA Inductive/Ballast, 1/6th HP Motor
Voltage (V)
120V
Pole
(1P) Single Pole
Width (in)
1.75
Height (in)
4.13
Depth (in.)
1.22
Color
Ivory
Watts Ballast
400VA
Watts Tungsten
600 Watt
Minimum ON/OFF Time
10 Minutes
Maximum ON/OFF Time:
45 Minutes
HP Rating:
1/6th HP Motor
Sold Separately:
Wall Palte
Switch Type:
Single Pole
UL Listed
UL, cUL
Case Quantity
1
Warranty
5 Year Limited
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: