Categories
Brands
CompareMagnitude M300L24DC - 300W - 24VDC - Dry and Wet Location Rated - Input 120Vac - Constant Voltage Magnetic Dimmable LED Driver
 Click to enlarge |
|
Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, ETL Listed, Certified to CSA Standard
M300L24DC : 300W 24VDC Magnetic Dimmable High Power LED Driver
Product Overview
Magnitude’s M300L24DC is the most compact LED driver on the market with a magnetic transformer core. It is equipped with two push-to-reset circuit breakers on the input and output, which protect both the load and driver. The driver is encased in a coated metal box that includes 2 knock-outs on the bottom to enable easy installation that complies with electrical code requirements.
Features
- Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch
- Dual protection – primary and secondary auto-reset circuit breakers
- Low operating temperature
- Nema 3R Enclosure – Outdoor Use
- Two knock-outs one on each side
- ETL Listed
- Certified to CSA Standard
Driver Specifications
| Max Load | 300W |
| Input Voltage | 120V AC |
| Input Current Full Load | 2.86 A |
| Output Voltage Full Load | 23V DC |
| Max Output Current Full Load | 20.8 A |
| Open Circuit Output Voltage | 25V DC |
| Power Factor | 0.93 |
| Avg. Efficiency | 90% |
| Coil Former | Double Section Bobbin |
| Thermal Class | B130°c |
| Leads Primary | PVC 600V #18 |
| Leads Secondary | PVC 300V #12 |
| Circuit Breakers | Secondary manual push-to-reset |
| Dimensions | 9.8 x 4.2 x 3.5" |
| Weight |
140 Oz. |
| Stock Code | MAGN_M300L24DC |
|---|---|
| Brand | Magnitude |
| Family | LED Voltage Drivers - LED Magnetic DC Drivers |
| Part No | M300L24DC |
| Ballast Type: | Hard Wired LED Driver |
| Dimmable | Yes |
| Length (in) | 9.8" |
| Width (in) | 4.2" |
| Height (in) | 3.5" |
| Voltage (V) | 120VAC |
| Input Current | 2.86 A |
| Wattage (w) | 300 Watt |
| Bulb Type | LED |
| Housing | Nema 3R Enclosure – Outdoor Use |
| Output Voltage | 24V |
| Output Current | 20.8A |
| Output Power | 30W Max |
| Power Factor | 0.93 |
| Start Temp. (Min) | ‐40°C (-40°F) |
| Start Temp. (Max) | 60°C (140°F) |
| Weight (lb.) | 8.75 |
| Lead Lengths | Leads Primary: PVC 600V #18; Leads Secondary: PVC 300V #12 |
| UL Listed | ETL, cETLus |
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.
