Categories
Brands
CompareALLTEMP Clamp-on Service Valves - 02-CD2140
 Click to enlarge |
|
1/4'' Tubing Size
Access & Service Valves
Features
• Valves are machined according to strict specifications of the ARI - Your assurance of proper sealing of valve and core surfaces.
• Generous counter bore permits removal of core if flare becomes damaged.
• All tees and crosses are tapped to receive an access core in all 1/4" SAE flare ends.
• All pipe connections have internal braze cups for dip tube application.
• Furnished with cap and one valve core (solder type loosely assembled).
Specifications
ARI Standard: 720 to 97
Temp. Range: -40°F to 400°F.
Pressure: 800 psig.
Valve Bodies: Brass.
Valve Core: Stainless steel and brass for use with all refrigerants such as R12, R22, R134a and R502. Resistant to oils, alkalies and dilute mineral acids. ARI torque 1.5 to 3.0 in/lb.
Connecting Line Size
|
OD Tube Size |
ODF International Tub Fit |
ODF External Tube Fit |
Swage Fit |
|
1/8" |
- |
3/16" |
- |
|
3/16" |
1/8" |
1/4" |
3/16" |
|
1/4" |
3/16" |
5/16" |
1/4" |
|
5/16" |
1/4" |
3/8" |
5/16" |
|
3/8" |
5/16" |
- |
3/8" |
B Series
A line tap valve that is easy to use! Five individual sizes for special access jobs. Viton gasket for heat extremes.
Installation Instructions
1. Place aluminumchannel on line. Insert aluminumslide into grooves on channel.
2. Grip slide and channel with pliers. Place steel pin in steel body and screw into place.
3. Holding grip on channel and slides, tighten steel housing. Unique torque action provides permanent clamp.
4. Continue to tighten steel housing. Neoprene gasket on pin gives long-life seal.
| Stock Code | ALLTEMP_02-CD2140 |
|---|---|
| Brand | ALLTEMP |
| Family | Clamp-On Service Valves |
| Part No | 02-CD2140 |
| Body | Brass. |
| Start Temp. (Min) | -40°F |
| Start Temp. (Max) | 400°F |
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
