Categories
Brands
CompareALLTEMP Oil Tap - 02-CD1808
 Click to enlarge |
|
Compressor oil tap.
Access & Service Valves
Features
• Valves are machined according to strict specifications of the ARI - Your assurance of proper sealing of valve and core surfaces.
• Generous counter bore permits removal of core if flare becomes damaged.
• All tees and crosses are tapped to receive an access core in all 1/4" SAE flare ends.
• All pipe connections have internal braze cups for dip tube application.
• Furnished with cap and one valve core (solder type loosely assembled).
Specifications
ARI Standard: 720 to 97
Temp. Range: -40°F to 400°F.
Pressure: 800 psig.
Valve Bodies: Brass.
Valve Core: Stainless steel and brass for use with all refrigerants such as R12, R22, R134a and R502. Resistant to oils, alkalies and dilute mineral acids. ARI torque 1.5 to 3.0 in/lb.
Connecting Line Size
|
OD Tube Size |
ODF International Tub Fit |
ODF External Tube Fit |
Swage Fit |
|
1/8" |
- |
3/16" |
- |
|
3/16" |
1/8" |
1/4" |
3/16" |
|
1/4" |
3/16" |
5/16" |
1/4" |
|
5/16" |
1/4" |
3/8" |
5/16" |
|
3/8" |
5/16" |
- |
3/8" |
Oil Tap
The oil tap is installed on a semi-hermetic compressor for changing oil and testing procedures. The internal pressure helps discharge the oil from the crankcase so acid tests can be made while the compressor is running. It allows the addition by vacuum or removal by pressure of oil while compressor is running. Hazardous refrigerant can be detected pooling in the crankcase before start-up and removal can be controlled using a compound gauge. The oil tap can be permanently installed.
| Stock Code | ALLTEMP_02-CD1808 |
|---|---|
| Brand | ALLTEMP |
| Family | Oil Tap |
| Part No | 02-CD1808 |
| Body | Brass. |
| Start Temp. (Min) | -40°F |
| Start Temp. (Max) | 400°F |
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
