Categories
Brands
Compare120V Floor Heating Mat - Covers 10 Square Feet - 1.0Amps - 120W - Danfoss 088L3150
 Click to enlarge |
|
Danfoss LX Electric Floor Heating (Dual-Adhesive Mat & Thermostat) System is an affordable luxury that brings warmth to life. It’s a proven technology that’s safe, reliable and energy efficient.
Danfoss LX - Electric Floor Heating
Dual Self-Adhesive Mats
Danfoss LX Electric Floor Heating System (Self-Adhesive Mat & Thermostat) is an aff ordable luxury that brings warmth to life . It’s a proven technology that is safe, reliable and energy effi cient. The unique adhesive system SAVES 70% ON INSTALLATION TIME!
- Pre-applied heating cable means even heat every time
- Dual-adhesive backing, no fastening required
- Single point connection
- Twin conductor cable
- Eliminates EMF’s (electromagnetic fields)
- Customize mat on the job site
- Minimal thickness-only adds 3/16” height to the floor
- Safety approved for wet locations
- Even heat every time
- No fastening required
- Genuine ten year non-prorated warranty, includes labor and materials
| Technical Data | LX Mats |
| Mat Construction: | Thermoplastic polymer coated fi berglass, self adhesive backing |
| Cable Construction: | Twin Conductor |
| Cable Diameter: | 3/16” (4.8mm) |
| Rated Voltage: | 120V, 208V, 240V |
| Max. Rated Temperature: | 212°F (100°C) |
| Conductor Insulation: | Tefl on™ FEP |
| Outer Insulation: | PVC |
Installs in minutes! Please watch following video before you start installation.
Danfoss New LX - Electric Floor Heating Installation Video
| Stock Code | Danfoss-088L3150 |
|---|---|
| Brand | Danfoss |
| Part No | 088L3150 |
| UPC | 5703466140130 |
| Voltage (V) | 120V |
| Coverage (sq.ft.) | 10 |
| Amperage | 1.0 Amps |
| Sold Separately: | 088L5130 - Programmable Thermostat with Floor Sensor |
| Heat Cable Power Rate | 12W/SQ.FT |
| Wattage (w) | 120 Watts |
| UL Listed | CSA, UL listed |
| Warranty | Genuine 20-Year Manufacturer Warranty |
| Cross Refefence |
All mats are 2 ft. in width. Power leads are 10 ft. in length. Floor Sensor Conduit is included. Contactors or Power Module is required for loads exceeding 15 amps on a single thermostat. Watt output of the 240V mats is reduced by 25% when operated at 208V (approximately 9W/sq.ft.) |
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.
